x

Search in
Sort by:

Question Status:

Search help

  • Simple searches use one or more words. Separate the words with spaces (cat dog) to search cat,dog or both. Separate the words with plus signs (cat +dog) to search for items that may contain cat but must contain dog.
  • You can further refine your search on the search results page, where you can search by keywords, author, topic. These can be combined with each other. Examples
    • cat dog --matches anything with cat,dog or both
    • cat +dog --searches for cat +dog where dog is a mandatory term
    • cat -dog -- searches for cat excluding any result containing dog
    • [cats] —will restrict your search to results with topic named "cats"
    • [cats] [dogs] —will restrict your search to results with both topics, "cats", and "dogs"

4.10 build crashes unreal instantly at swarm connection message. Or fails.

4.10 building crashes unreal instantly at swarm connection message. OR it just failes.... and doesnt crash Just a simple lighting build failed message... Here is the log.. On a side note i am so sick and tired of this engine. its 90% bug report.. 10% doing any actual work...

LightingResults: New page: Lighting Build LoadErrors: New page: Loading map: BathHouse_Sections3.umap MapCheck: New page: Map Check LightingResults: New page: Lighting Build LogParticles: Destroying 0 GPU particle simulations for FXSystem 0x000000FB689C6DE0 LogEditorServer: Finished looking for orphan Actors (0.000 secs) Cmd: MAP CHECKDEP NOCLEARLOG MapCheck: Info Map check complete: 0 Error(s), 0 Warning(s), took 381.238ms to complete. LogFileHelpers: Loading map 'BathHouse_Sections3' took 1.816 Cmd: UpdateLandscapeEditorData -warnings Cmd: UpdateLandscapeEditorData LogHttp:Warning: Timeout processing Http request. 000000FC87E6C200 MapCheck: New page: Map Check Cmd: MAP REBUILD ALLVISIBLE LogEditorServer: Rebuildmap Clear paths rebuilt MapCheck:Warning: Warning WorldSettings_1 Hierarchical LOD System is disabled or no HLOD level settings available, unable to build LOD actors. LogStats: STAT_HLOD_BuildClusters - 45.661 ms LightingResults: New page: Lighting Build - Nov 15, 2015, 11:04:59 AM LightingResults:Warning: Warning InstancedFoliageActor_1 Instanced meshes don't yet support unique static lighting for each LOD, lighting on LOD 1+ may be incorrect LightingResults:Warning: Warning InstancedFoliageActor_1 Instanced meshes don't yet support unique static lighting for each LOD, lighting on LOD 1+ may be incorrect LightingResults:Warning: Warning InstancedFoliageActor_1 Instanced meshes don't yet support unique static lighting for each LOD, lighting on LOD 1+ may be incorrect LightingResults:Warning: Warning InstancedFoliageActor_1 Instanced meshes don't yet support unique static lighting for each LOD, lighting on LOD 1+ may be incorrect LightingResults:Warning: Warning InstancedFoliageActor_1 Instanced meshes don't yet support unique static lighting for each LOD, lighting on LOD 1+ may be incorrect LightingResults:Warning: Warning InstancedFoliageActor_1 Instanced meshes don't yet support unique static lighting for each LOD, lighting on LOD 1+ may be incorrect LightingResults:Warning: Warning InstancedFoliageActor_1 Instanced meshes don't yet support unique static lighting for each LOD, lighting on LOD 1+ may be incorrect LightingResults:Warning: Warning InstancedFoliageActor_1 Instanced meshes don't yet support unique static lighting for each LOD, lighting on LOD 1+ may be incorrect LightingResults:Warning: Warning InstancedFoliageActor_1 Instanced meshes don't yet support unique static lighting for each LOD, lighting on LOD 1+ may be incorrect LightingResults:Warning: Warning InstancedFoliageActor_1 Instanced meshes don't yet support unique static lighting for each LOD, lighting on LOD 1+ may be incorrect LogStaticLightingSystem: Running Lightmass w/ ImmediateImport mode ENABLED LogStaticLightingSystem: Running Lightmass w/ ImmediateProcess mode ENABLED LogStaticLightingSystem: Running Lightmass w/ Sorting mode ENABLED LogStaticLightingSystem: Running Lightmass w/ Mapping paddings ENABLED LogStaticLightingSystem: Running Lightmass w/ Mapping debug paddings DISABLED LogEditorBuildUtils: Build time 0:00:02 Cmd: UpdateLandscapeEditorData

Product Version: UE 4.10
Tags:
more ▼

asked Nov 16 '15 at 02:09 AM in Bug Reports

avatar image

kurylo3d
464 46 82 108

avatar image Logan Bailey ♦♦ STAFF Nov 17 '15 at 06:35 PM

Hey kurylo4d,

So, If you would :

  1. Link me your DxDiag

  2. Send me your machine ID and Epic Account so I can look up the crash from our crash reporter database.

  3. Send me a copy of your .uproject and your "content" and "config" folders from your project that is causing this.

  4. Does this still happen in 4.9?

After I gather all of this I may be able to figure out why you can't build lighting.

Logan

avatar image kurylo3d Nov 17 '15 at 07:49 PM

Hey Logan,

I will get that to you when i get home. To answer your questions.. no that did not happen in 4.9. Dont even have 4.9 installed now... guess that was a mistake on my part. Also will there even be a crash report? I mean it completely closes out hte process.. unreal editor isnt even there when you ctrl alt delete. Its just poof and gone. Not even a crash message.

Oh also where would i find machine ID?

avatar image Logan Bailey ♦♦ STAFF Nov 17 '15 at 07:59 PM

The machine ID would be on the crash report. As you say, the crash reporter never appears so that would be a bit difficult to use that as a reference. Just, forget that step for now.

avatar image kurylo3d Nov 17 '15 at 08:02 PM

I am thinking that the crash may be when i attempt to use swarm coordinator and coordinate between my 3 computers... Recently switched the coordinator to this computer.. same computer running unreal for testing since when it was on the other one it still wasnt working..

All are using 4.10 agents / coordinator. Made sure of that before i attempted.

When i try to do the build without swarm coordinator and jsut on teh machine alone.. it usually just goes straight to build failed message... with teh above text in unreal editor log.

That being said... my work computer at my job on 4.10 working alone is able to get to a build without a build failed message.. so it has to be something specific to my home computer. Which is a way better computer :/

avatar image kurylo3d Nov 18 '15 at 11:22 AM

link text

Thats my dx diag.. the content folder is over 36 gb... and this also happens on all projects in 4.10 on this comp...

dxdiag.txt (59.0 kB)
avatar image Logan Bailey ♦♦ STAFF Nov 17 '15 at 08:20 PM

This is a duplicate of the issue you are currently being helped with here.

https://answers.unrealengine.com/questions/316346/is-swarm-agent-disconnecting-computer-during-build.html

Eric has been given a link to this thread.

I will be marking this as answered. In the future please refrain from duplicates of the same issues. We will handle your issues as best we can but we cannot delegate multiple members of our team to the same issue.

Logan

avatar image kurylo3d Nov 17 '15 at 09:52 PM

Actually its a whole different issue.

  1. had computers doing builds... but it had weirdness going on where they wouldnt make it to the blue bars or whatever...

THat was that link...

This problem however is totaly different.. its now with 4.10.. and its crashing.. or not building at ALL!!! its build failed now.. io never had build failed before.. i would at least build even if it wasnt taking advantage of the other computers.

avatar image Logan Bailey ♦♦ STAFF Nov 18 '15 at 03:04 PM

"I am thinking that the crash may be when i attempt to use swarm coordinator and coordinate between my 3 computers... Recently switched the coordinator to this computer.. same computer running unreal for testing since when it was on the other one it still wasnt working."

"4.10 building crashes unreal instantly at swarm connection message."

When it crashes there is no message. Not from unreal crash reporter... not from windows... nothing.. its just poof where did unreal go... and i hit ctrl alt delete the unreal editor exe isnt even there.. which is very odd..."

"I recently switched the coordinator to this computer that is having the issue... when i went to 4.10 i switched the coordinator to the one that is runnign the edtior.. and this magic crash happens (I THINK) when the coordinator running.. otherwise if i try to do the build alone it just says build failed with no crash. I will look through your link. Oh and the build does not fail if i build on my computer at my job (which is a much worse computer) So it has to be something specific on that computer at home..."

This is exactly the issue you have described in the other post. From your description of this issue I believe that the two are related.

Thank you for reporting this issue and I encourage you to refer Eric to this Post. At this time I cannot continue to address this issue as it is directly related if not identical to the issue you are having in your other thread. This could, perhaps, help resolve the other issue you are having and subsequently resolve this one.

Logan

(comments are locked)
10|2000 characters needed characters left
Viewable by all users

1 answer: sort voted first

For anyone looking for an answer to this particular problem , it was because swarm exes were set to run as administrator... This needs to be turned off or else it will not work.

more ▼

answered Dec 01 '15 at 05:32 PM

avatar image

kurylo3d
464 46 82 108

(comments are locked)
10|2000 characters needed characters left
Viewable by all users
Your answer
toggle preview:

Up to 5 attachments (including images) can be used with a maximum of 5.2 MB each and 5.2 MB total.

Follow this question

Once you sign in you will be able to subscribe for any updates here

Answers to this question